You are here: Gida » Kayayyaki » PVC kumfa » Low Density Good Compression Closed Cell PVC Foam

Low Density Good Compression Closed Cell PVC Foam

Rufe Cell PVC Kumfa Mai hana ruwa UV Resistant Automotive Foam Material don

Samfura:
P120
Alamar:
Topsun
Yawan yawa:
130± 20 Kg/M³
Kauri:
0.5-25 mm


Samar da Hatimin Taillight:



Tambaya

Bayanin Samfura

Bayanin Samfura

PVC Soso Kumfa Rufe Tantanin Rubutun Kumfa Siffofin:

• Rufe tsarin tantanin halitta, tare da kyakkyawan ƙaƙƙarfan ƙura da aikin hana ruwa

• Ƙarfin ikon rufewa

• Juriya na yanayi da ƙarancin zafin jiki

•Rashin rage sauti

•Ya dace da masu lankwasa da siffofi marasa tsari

Ƙayyadewar Kumfa Sponge na PVC:

Dukiya	Hanyar Gwaji	Daraja ko Rating
Yawan yawa	Saukewa: ASTM D1667	130± 20kg/m3
Tauri (Share 00)	Saukewa: ASTM D2240	15± 5 °
Ƙarfin Ƙarfi	Saukewa: ASTM D412	≥190kPa
Tsawaitawa a Break	Saukewa: ASTM D412	≥210%
Tilasta matsawa da kashi 25%	Saukewa: ASTM D1667	≥5kPa
Saitin Matsi 30%.	Saukewa: ASTM D1667	≤4%
Flammability	Farashin UL94	Akwai A Na Musamman
	FMVSS 302	Wuce
ROHS	2011/65/EU&(EU)2017/2102	Wuce
PFOA / PFOS	CEN/TS 15968(2010)	Wuce

PVC Sponge Foam FAQ

1. Menene PVC Sponge Foam ?

Polyvinyl Chloride (PVC) Kumfa wani kumfa ce mai rufaffiyar cell PVC wanda aka tsara don samar da mafita na tattalin arziki don rufe haske, iska, danshi, da ƙari. Ta hanyar daidaita yawan kumfa (80kg/m³ ~ 500kg/m³), taushi / taurin (Shore 00 5 ° ~ 99 °), juriya, da sauran kaddarorin, yana iya ba da aikin da aka keɓance ga yanayin aikace-aikacen daban-daban. Ya dace sosai don amfani da yawa, irin su damping na motsin jikin abin hawa, rufe kofa da taga, rufewar tankin ruwa, rufewar HVAC, kwantar da hankali don samfuran lantarki, da ƙari.

2.What is Application of PVC Sponge Foam?

●Kofa da tagar da aka rufe

●Motoci, taksi, da hatimin jikin abin hawa

●HVAC rufewa

● Rufe kayan aiki

●Gasket ɗin da aka yanka

●Rufewar na'urar lantarki

● Aikace-aikacen layin dogo/marine

●Kayan wutan waje

3. Wanene kai?

Topsun, mai ba da ƙwararrun masu ba da izini don Foams, za mu iya samar da nau'ikan samfuran kumfa, irin su kumfa EVA, kumfa PE, kumfa neoprene, kumfa EPDM da NBR kumfa.

4.Wane irin kayan kumfa za mu iya bayarwa?

Za mu iya bayar da: EVA kumfa, PE kumfa, XPE kumfa, IXPE kumfa, CR kumfa, EPDM kumfa, Neoprene kumfa, SBR kumfa, NBR kumfa, Micro-cell taushi PVC kumfa. Dukansu za mu iya bayarwa a cikin takarda da nadi.

5.Menene karfin sarrafawa da muke da shi?

1. Yanke - yankan girman kamar yadda buƙatar abokin ciniki

2. Slicing - Yanke kauri kamar yadda abokin ciniki ya buƙaci

3. Lamination - zafi narke fim lamination, harshen wuta, da kuma matsa lamba-m m lamination

4. Laser Vibrator - Sabon nau'in yankan na'ura, zai iya yanke zanen kumfa ba tare da budewa ba

5. Mutu yankan - Buɗe kyawon tsayuwa kamar yadda ƙirarku ta tsara sannan da farko, yi amfani da injin yankan mutu don samar da, yana da sauri fiye da vibrator laser.

6. Matsi Molding - Matsi gyare-gyaren tsari ne da muke amfani da shi don samar da kumfa mai nau'in nau'i uku da nau'in kumfa mai kumfa. Hanya ce mai kyau don yin sassa waɗanda ke da fa'idodi masu banƙyama, suna buƙatar ƙayyadaddun juzu'i na juzu'i, suna da kauri daban-daban na bango ko buƙatar a riƙe su zuwa juriya mai mahimmanci.

7. Injin zana - Yawancin lokaci don yin saka akwatin kayan aiki da saka kayan aiki kamar yadda buƙatun abokin ciniki.

8. Silk-screen bugu - Buga tambura da alamu akan saman samfuran kumfa

9. M goyon baya - Gluing a saman kumfa tare da layi. Yawancin lokaci ana samar da kaset ɗin kumfa kuma sauran samfuran suna buƙatar tsayawa.

6.Where is mu makaman located ?

Kamfaninmu yana cikin birnin Changzhou, lardin Jiangsu. Tuki awa daya zuwa tashar ruwa ta Shanghai.

7.Yaya ake samun samfurori?

Aika tambaya zuwa july@topsunfoam.com , tare da cikakkun bayanan ku na buƙatun kumfa, za mu bincika amsa a cikin sa'o'i 24. Mun himmatu don ci gaba da samar da kyawawan kayayyaki da sabis ga abokan ciniki a duk duniya.

Na baya:

Na gaba: