EVA Foam
Topsun
≥2.5N/cm
≤5.0Kpa
110-130kgs/m3
≥120Kpa
Product Description
Topsun closed cell EVA foam sheet is a lightweight and resilient foam material designed for protective packaging, tool box inserts, case inserts, cushioning, shock absorption, vibration damping, gym and sports products, artificial grass applications and custom industrial foam components.
EVA foam combines a closed-cell structure with good dimensional recovery, water resistance and easy fabrication. It can be supplied as sheets, blocks, rolls, tapes, pads, inserts and custom die-cut parts according to application requirements.
The referenced EVA foam grade has a density specification of 110–130 kg/m³, tensile strength of ≥120 kPa, compression deflection of ≤5.0 kPa and tearing strength of ≥2.5 N/cm. Different colors and converted formats can be evaluated according to customer requirements.
Closed-cell structure: provides low water absorption and good moisture resistance for suitable applications.
Lightweight: helps reduce the overall weight of packaging, inserts and finished components.
Shock absorption: suitable for protecting tools, instruments and products from impact during handling and transportation.
Vibration damping: flexible foam can help reduce vibration transmission between products and surrounding structures.
Dimensional recovery: EVA foam can recover after suitable compression and provide repeated cushioning.
Smooth surface: suitable for presentation cases, tool inserts, packaging inserts and finished foam components.
Thermal insulation: closed-cell EVA foam can provide thermal resistance in suitable equipment and construction applications.
Flexible fabrication: EVA foam can be cut, sliced, laminated, engraved, die-cut and adhesive-backed.
Custom colors: different colors can be evaluated according to project requirements.
| Item | Product Information |
| Material | EVA Foam |
| Cell Structure | Closed Cell |
| Referenced Density | 110–130 kg/m³ |
| Referenced Tensile Strength | ≥120 kPa |
| Referenced Compression Deflection | ≤5.0 kPa |
| Referenced Tearing Strength | ≥2.5 N/cm |
| Color | Custom colors can be evaluated according to requirements |
| Available Forms | Sheet, Block, Roll, Strip, Tape, Pad, Insert and Custom Die-Cut Parts |
The following technical data applies to the referenced EVA foam grade currently provided with this product. Final specifications should be confirmed according to the selected density, thickness and finished application.
| Item | Test Standard | Specification | Test Result | Unit |
| Density | GB/T 6343-1995 | 110–130 | 123.5 | kg/m³ |
| Tensile Strength | GB/T 6344-2008 | ≥120 | 241.0 | kPa |
| Tensile Rate | GB/T 6344-2008 | ≥120 | 196 | % |
| Compression Deflection | ASTM D 1056 | ≤5.0 | 2.9 | kPa |
| Compression Deformation | GB/T 6669-2008 | ≤30 | 6.0 | % |
| Tearing Strength | GB/T 10808-2006 | ≥2.5 | 6.5 | N/cm |
| Low Temperature Test | ASTM D 1056 | -40°C ±1°C, 5 h; Soft, No Cracking | Pass | — |
| High Temperature Test | GB/T 17794-1999 | 90°C ±3°C, 7 days; ≤10.0 | 7.14 | % |
EVA stands for ethylene vinyl acetate. EVA foam is a lightweight polymer foam with a closed-cell structure in which individual cells are separated from each other.
The closed-cell structure helps reduce moisture absorption and gives the material a smooth surface, stable shape and useful cushioning performance.
EVA foam combines flexibility with dimensional recovery and can be converted into protective inserts, cushioning pads, tapes, gaskets, sports components and other custom foam products.
Density, hardness and thickness should be selected according to the required support, compression, impact protection and finished component design.
Closed cell EVA foam is widely used for tool box inserts, equipment cases and protective storage systems because it combines cushioning with a clean, structured appearance.
Cavities can be cut or engraved according to the dimensions of tools, instruments or equipment. Different foam layers can also be laminated where a multi-level insert structure is required.
For custom tool inserts, provide the case dimensions, tool layout, product dimensions, required foam depth and any color-layer requirements.
EVA foam can protect instruments, electronics, mechanical parts and other products from impact and vibration during storage, handling and transportation.
The correct foam grade depends on product weight, fragility, cavity design, expected impact and the amount of compression available inside the packaging.
Topsun can process EVA foam into custom packaging inserts, pads, trays and protective components according to drawings or product dimensions.
EVA foam can be used in selected gym, sports and recreation products where cushioning, shock absorption, lightweight construction and flexibility are required.
Required density, hardness and thickness should be matched to the intended load, impact level, user contact and finished product construction.
EVA foam can be considered as a cushioning or support layer in suitable artificial grass systems where shock absorption and resilience are required.
For artificial grass projects, foam thickness, density, compression performance, drainage requirements and installation method should be evaluated according to the complete system design.
Flexible EVA foam can be placed between equipment and surrounding structures to provide cushioning and reduce direct mechanical contact.
Suitable foam pads and strips can help absorb shock and reduce vibration transmission in industrial equipment, transportation cases and other assemblies.
| Application | Typical Function |
| Tool Box Inserts | Organizes and protects tools with custom-cut cavities. |
| Protective Case Inserts | Cushions instruments, electronics and equipment inside cases. |
| Packaging Inserts | Shock and vibration protection during storage and transportation. |
| EVA Foam Tape | Cushioning, spacing and suitable mounting or sealing applications. |
| Gym and Sports Products | Cushioning and impact absorption in suitable finished products. |
| Artificial Grass Systems | Selected cushioning and support-layer applications. |
| Automotive Components | Cushioning, vibration damping and protective interfaces. |
| Construction Components | Cushioning, spacing, insulation and suitable joint applications. |
| Industrial Equipment | Pads, spacers, vibration-control components and protective foam parts. |
EVA Foam Tool Box Insert
EVA Foam Tape
EVA Foam Rolls
Closed-cell construction for good moisture resistance.
Lightweight structure for packaging and weight-sensitive components.
Non-abrasive surface for protecting finished products.
Easy fabrication by cutting, slicing, engraving, lamination and die cutting.
Low-dusting material for clean inserts and packaging applications.
Shock absorption for protective packaging and cushioning.
Vibration damping for tools, equipment and transportation cases.
Flexible and resilient for repeated compression applications.
Good water resistance due to the closed-cell structure.
Thermal insulation for suitable equipment and construction uses.
| Converted Form | Typical Use |
| EVA Foam Sheet | General fabrication, packaging and component production. |
| EVA Foam Block | Thick inserts, layered fabrication and custom cutting. |
| Tool Box Insert | Custom cavities for tools, instruments and equipment. |
| Packaging Insert | Protective cushioning for sensitive products. |
| EVA Foam Tape | Cushioning, spacing and suitable mounting applications. |
| Die-Cut EVA Part | Custom pads, spacers, inserts and protective components. |
| Adhesive-Backed EVA | Helps position foam during suitable assembly processes. |
Application: packaging, tool insert, gym product, artificial grass, cushioning, automotive or industrial component.
Density: specify the required density or desired firmness and support level.
Hardness: identify the required softness or firmness where applicable.
Thickness: select according to cushioning depth, cavity geometry and compression requirement.
Product weight: for packaging and inserts, provide the weight and dimensions of the protected item.
Impact requirement: provide the required protection level where known.
Color: specify the required color or color combination.
Surface construction: identify whether plain, laminated or layered foam is required.
Adhesive backing: specify whether adhesive-backed EVA is required.
Finished form: sheet, block, roll, strip, tape, pad, insert or die-cut part.
Drawing or dimensions: provide CAD drawings, dimensions or samples for custom inserts where available.
Estimated quantity: provide sample, trial and production requirements where available.
Topsun provides foam material supply together with custom converting according to customer drawings, dimensions and finished product requirements.
1. Cutting: EVA foam sheets, blocks and rolls can be cut according to required dimensions.
2. Slicing: foam blocks and sheets can be sliced to the required thickness.
3. Lamination: hot-melt film lamination, flame lamination and pressure-sensitive adhesive lamination are available.
4. Laser Cutting: suitable custom foam shapes can be processed according to digital drawings.
5. Die Cutting: custom inserts, pads, strips and repeatable foam components can be manufactured according to customer designs.
6. Compression Molding: three-dimensional molded foam and foam composite components can be produced for suitable applications.
7. Engraving: suitable for tool box inserts, packaging inserts and cavity foam components.
8. Silk-Screen Printing: logos and patterns can be printed on suitable EVA foam surfaces.
9. Adhesive Backing: adhesive and release liner can be applied to suitable EVA foam for tapes, pads, strips and custom parts.
Topsun supplies EVA foam, PE foam, XPE foam, IXPE foam, CR foam, EPDM foam, neoprene foam, SBR foam, NBR foam, NBR/PVC foam and micro-cell soft PVC foam in sheet, roll, block and custom converted forms.
Topsun supplies foam materials and custom foam components for packaging, tool storage, automotive, construction, sports, equipment and industrial applications. Customers can provide density, thickness, hardness, color, dimensions, drawings and processing requirements for product evaluation.
Our facility is located in Changzhou City, Jiangsu Province, China, with convenient access to Shanghai Port for international shipments.
Closed cell EVA foam is a lightweight foam material made from ethylene vinyl acetate. Its closed-cell structure provides good moisture resistance, cushioning, shock absorption and dimensional recovery.
EVA foam sheets are used for tool box inserts, protective packaging, case inserts, foam tapes, cushioning pads, gym and sports products, artificial grass applications, automotive components and custom industrial parts.
The referenced product specification lists density from 110–130 kg/m³, with a recorded test result of 123.5 kg/m³.
The specification lists tensile strength of ≥120 kPa according to GB/T 6344-2008, with a recorded test result of 241.0 kPa.
The referenced grade lists compression deflection of ≤5.0 kPa according to ASTM D 1056, with a recorded result of 2.9 kPa.
Closed-cell EVA foam has good resistance to water absorption because its cells are predominantly isolated. Final performance depends on density, thickness, cut edges and the construction of the complete assembly.
Yes. EVA foam can be cut, engraved, laminated and die-cut into custom cavities for tools, instruments and equipment. Provide case dimensions and tool layout for component evaluation.
Yes. EVA foam provides cushioning and shock absorption for products during storage and transportation. Foam density and thickness should be selected according to the product weight and required protection.
EVA foam can be used in suitable gym and sports products where cushioning, flexibility and impact absorption are required. Density, hardness and thickness should be selected according to the finished product.
EVA foam can be evaluated as a cushioning or support layer in suitable artificial grass systems. The complete installation should consider compression, drainage, thickness and system design.
Different colors can be evaluated according to customer requirements. Provide the required color reference when requesting a quotation.
Yes. Topsun provides adhesive-backing processing for suitable EVA foam sheets, strips, tapes, pads and custom parts. The bonding substrate and service conditions should be provided for evaluation.
Yes. Topsun can cut, engrave and die-cut suitable EVA foam into inserts, pads, strips, tapes and custom components according to drawings, dimensions or samples.
Selection should consider density, hardness, thickness, dimensions, product weight, cushioning requirement, compression, color, adhesive requirement, application environment and required converting method.
Please provide the application, density if known, hardness if known, thickness, sheet or block dimensions, color, adhesive requirement, drawings or cavity layout, finished quantity and estimated order quantity.
Send your requirements to july@topsunfoam.com, including density if known, thickness, dimensions, color, application and estimated quantity for evaluation.
